Product

Recommended Product

Contact US

ZIBO BOSHAN TIAN TI CACUUM CO.,LTD

E-Mail：ttpump@163.com
Phone：+86-13615332800
Tel：+86-0533-4160533
Address：3 Yanhe East Road, Boshan, Zibo, Shandong

2SK Series liquid ring vacuum pump and compressors

AddTime：2020/9/25 15:52:58

2SK series two stage vacuum pump and 2SK-P1 series two stage vacuum pump with steam ejector system can be used to vacuum gas which not contain solid particle, insoluble in water and non corrosive to form vacuum and pressure in a closed container.

It can be widely used in food, chemical, medicine, metallurgy and electronics industries to make vacuum evaporation, vacuum concentration, vacuum wetting, vacuum impregnation, vacuum drying and vacuum metling. It has the advantages of high vacuum, high capacity in high vacuum, compact sized, easy maintenance and high reliability.

2SK series pumps apply to use in the condition of suction pressure lower than -0.08Mpa. 2SK-P1 series apply to use in the condition of suction pressure lower than -0.096Mpa, the limit vacuum pressure can reach to -750mmHg when adapt with steam ejector.

Vacuum range:-0.03--0.08MPa

Main Features:

Compared with single stage liquid ring pumps, it has the advantages of high vacuum and high capacity in high vacuum condition.

Compact sized, easy maintenance.

Wide range of applications: extract all kinds of air except the air that contain steam or dust, inflammable and explosive.

Water is the main working medium, low maintenance cost.

Able to work in relatively harsh conditions.

2SK series two stage liquid ring vacuum pump technical specification

Model	Capacity (米3/分)		Limit vacuum pressur (MPa)	Motor power (KW)	RPM (R/M)	Water supply data (L/min)	caliber (mm)		Pump weight (Kg)
Model	Max	Inlet pressure -0.093MPa (-700mmHg)	Limit vacuum pressur (MPa)	Motor power (KW)	RPM (R/M)	Water supply data (L/min)	in	out	Pump weight (Kg)
2SK-1.5	1.5	0.9	-0.097(-725)	4	1440	10-15	40	40	140
2SK-3	3	2	-0.097(-725)	7.5	1440	15-20	40	40	180
2SK-6	6	4	-0.098(-735)	15	1460	25-35	50	50	250
2SK-12	12	8	-0.098(-735)	22	970	40-50	100	100	400
2SK-20	20	14	-0.098(-735)	45	740	60-80	125	125	550
2SK-30	30	20	-0.098(-735)	55	741	60-80	125	125	700

2SK-P1 series two stage liquid ring vacuum pump-steam ejector system technical specification

Model	Air extraction rate (m 3/ min)		Limit vacuum pressur (MPa)	Motor power (KW)	RPM (r/m)	Water supply data (L/min)	caliber (mm)		(Kg)
Model	Max	Inlet pressure -0.093MPa (-700mmHg)	Limit vacuum pressur (MPa)	Motor power (KW)	RPM (r/m)	Water supply data (L/min)	in	out	(Kg)
2SK-1.5P1	1.5	0.9	-0.099(-750)	4	1440	10-15	40	40	140
2SK-3P1	3	2	-0.099(-750)	7.5	1440	15-20	40	40	180
2SK-6P1	6	4	-0.099(-750)	15	1460	25-35	50	50	250
2SK-12P1	12	8	-0.099(-750)	22	970	40-50	100	100	400
2SK-20P1	20	14	-0.099(-750)	45	740	60-80	125	125	550
2SK-30P1	30	20	-0.099(-750)	55	741	60-80	125	125	700

Note:1, The data in the table is created according to the items below:
① Atmosphere pressure 0.1013MPa(760mmHg)
② Water temperature:15℃
③ Air temperature 20℃
④Relative humidity 70%
2、Water supply data is based on the condition of suction pressure is -0.05Mpa(-400mmHg)
3、Capacity differences less than ±10%
4、When suction pressure is -0.093MPa, the capacity data is with steam ejector controlled by solenoid valve.

Previous：SK Series liquid ring vacuum pumps and compressors

Next：CL Series Vacuum Pump and Compressor